基于JN5169-001/JN5168-001/JN5164-001的智能家庭无线中控解决方案
原标题:智能家庭无线中控
随着社会的不断发展,信息交流和沟通也就变得越来越频繁,越来越重要。各种视听设备、投影设备,灯光,智能家电等开始进入现代化家庭。多种设备的使用必定带来烦杂的设备操作。要打开多种设备电源,如:要关闭灯光,要频频切换各种智能家电信号,要不断切换开关等等。在这种情况下,一种能够集中管理这些设备,并能同时控制智能家庭各种资源的“无线 [中央控制系统]”设备便应运而生。
用户可用按钮式 [控制面板]、计算机显示器、触摸屏和无线遥控等设备,通过计算机和[中央控制系统] 软件控制视听设备、投影设备,智能家电、电动窗帘、灯光等设备。当把几个独立的 [中央控制系统] 相互连接起来,就可构成网络化的中央控制系统,可实现资源共享、影音互传和相互监控。作为一个智能家庭无线中控一般由四部分组成:1. 用户界面; 2. 中央控制主机;3. 各类无线控制接口;4. 受控设备。
当今的智能家居快速扩展到许多设备和终端节点。这需要同时了解多个无线协议的用户界面。这些显示器是无线的,不需要壁挂式供电,可以进行无线充电和供电,从而更轻松地监控智能家居。NXP 解决方案可以帮助创建引人入胜、具备用户界面显示器,可以与所有的物联网智能家居设备通信。
JN5169 ZigBee® and IEEE802.15.4 Wireless Microcontroller
NXP’s JN5169 features 512 kB embedded Flash, 32 kB RAM, 4 kB EEPROM memory, and radio outputs up to 10 dBm
NXP Semiconductors
JN5169 ZigBee® and IEEE802.15.4 Wireless Microcontroller
NXP’s JN5169 features 512 kB embedded Flash, 32 kB RAM, 4 kB EEPROM memory, and radio outputs up to 10 dBm
Image of NXP Semiconductor JN5169XK010,598: ZigBee Generic Node Expansion KitThe JN5169 from NXP Semiconductor is an ultra-low-power, high-performance wireless microcontroller suitable for ZigBee applications. It features 512 kB embedded Flash, 32 kB RAM, and 4 kB EEPROM memory, allowing OTA upgrade capability without external memory. The 32-bit RISC processor offers high coding efficiency through variable width instructions, a multi-stage instruction pipeline, and low-power operation with programmable clock speeds. It also includes a 2.4 GHz, IEEE802.15.4 compliant transceiver and a comprehensive mix of analog and digital peripherals. The best-in-class RX operating current (down to 13 mA and with a 0.7 μA sleep timer mode) gives excellent battery life, allowing operation direct from a coin cell.
The peripherals support a wide range of applications. They include a two-wire, compatible I²C-bus and SPI-bus which can operate as either master or slave and a six-channel ADC with a battery monitor and a temperature sensor. It can support a large switch matrix of up to 100 elements, or alternatively, a 40-key capacitive touch pad.
Features Applications
Single-chip device to run stacks and applications
Very-low-current solution for long battery life; over 10 years
Very-low RX current for low standby power of mains powered nodes
Integrated power amplifier for long-range and robust communication
High tolerance to interference from other 2.4 GHz radio sources
Supports multiple network stacks
Highly featured, 32-bit RISC CPU for high performance and low power
Large embedded Flash memory to enable over-the-air firmware updates without external Flash memory
System BOM is low in component count and cost
Flexible sensor interfacing options
Very-thin, quad, flat, 6 x 6 mm, 40 terminal package
Lead-free and RoHS compliant
Temperature range: -40°C to 125°C
Robust and secure, low-power wireless applications
ZigBee smart energy networks
ZigBee light link networks
ZigBee home automation networks
Toys and gaming peripherals
Energy harvesting
Self-powered switches
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。