描述：The ZWX Series can be used in ambient temperatures from -10°C to + 70°C with operation at 100% load from -10°C to 50°C. This specification is unique to the World"s No.1 provider of industrial power supplies. **Features: * ** Operating time at peak output is less than 5sec. (Average output power and current are less than maximum output power and current.) ** * ** At total output power (Forced air) (V1=6.5A, V2=6.5A, V3=7.7A, V4=0.2A, V5=1.0A), Ta=25?. ** * ** At total output power (Forced air). ** * ** For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC (50/60Hz). ** * ** Not applicable for the inrush current to Noise Filter for less than 0.2ms. ** * ** Please refer to Fig. A for measurement of line & load regulation and ripple voltage. ** * ** 85 - 265VAC, constant load. ** * ** No load-Full load, constant input voltage. ** * ** Avoid to operate at overload or short circuit condition for more than 30 seconds. V1, V2, V3 : OCP circuit will shut down output except V5 with delay (more than 5s), manual reset (PS_ON reset or re power on). V4 : Constant current limit with automatic recovery. V5 : Constant current limit in conjunction with all output with automatic recovery. ** * ** OVP circuit will shut down output, manual reset (PS_ON reset or re power on). ** * ** Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz), Ta=25?. ** * ** At forced air cooling, standard mounting. Refer to output derating curve.