原标题：STM32三菱PLC FX2N原理图pcb图底层C源码器件清单量产方案资料

应用领域:工业电子

方案类型:模块板卡

主要芯片:STM32F103RCT6

方案概述

STM32国产三菱PLC FX2N原理图pcb图底层C源码器件清单量产方案资料

输入点:24点(四路高速脉冲)

输出点:14点

测试视频:https://pan.baidu.com/s/1OLV3eXIzOFnkFkxF4SiBrA

本版本有 C源程序、原理图、PCB工程、BOM清单、梯形图测试文件

文件均是公司量产文件,并且已量产出货几万台,现将量产方案对外销售,有需要请联系!

具体支持功能指令:

说明:1、功能简介内的参数在程序软件里都有,其余没列出的详细参考FX2N说明书,99.9%的功能都有,有些边边角角没有的,我们也在一直努力更新完善中;

2、以下硬件板子是给市场某个商家定制的,应商家需求阉割了一些他们没有用到的功能;贵司要是有自己的需求,可以自行添加程序内有的外围硬件。

【STM32F103RCT6】

STM32F103RCT6是一种嵌入式-微控制器的集成电路(IC),芯体尺寸是32位,速度是72MHz,程序存储器容量是256KB,程序存储器类型是FLASH,RAM容量是48K。

基本参数:

系列:STM32

芯体尺寸:32-位

速度:72MHz

连通性:CAN,I2C,IrDA,LIN,SPI,UART/USART,USB

外围设备:DMA,电机控制PWM,PDR,POR,PVD,PWM,温度传感器,WDT,晶振

输入/输出数:51

程序存储器容量:256KB

程序存储器类型:FLASH

RAM容量:48K

电压-电源(Vcc/Vdd):2 V ~ 3.6 V

振荡器型:内部

工作温度:-40°C ~ 85°C

封装/外壳:64-LQFP

包装:托盘

STM32F103RC

Mainstream Performance line, ARM Cortex-M3 MCU with 256 Kbytes Flash, 72 MHz CPU, motor control, USB and CAN

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.

主要特性

Core: ARM® 32-bit Cortex®-M3 CPU

72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

Single-cycle multiplication and hardware division

Memories

256 to 512 Kbytes of Flash memory

up to 64 Kbytes of SRAM

Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

LCD parallel interface, 8080/6800 modes

Clock, reset and supply management

2.0 to 3.6 V application supply and I/Os

POR, PDR, and programmable voltage detector (PVD)

4-to-16 MHz crystal oscillator

Internal 8 MHz factory-trimmed RC

Internal 40 kHz RC with calibration

32 kHz oscillator for RTC with calibration

Low power

Sleep, Stop and Standby modes

VBAT supply for RTC and backup registers

3 × 12-bit, 1 μs A/D converters (up to 21 channels)

Conversion range: 0 to 3.6 V

Triple-sample and hold capability

Temperature sensor

2 × 12-bit D/A converters

DMA: 12-channel DMA controller

Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs

Debug mode

Serial wire debug (SWD) & JTAG interfaces

Cortex®-M3 Embedded Trace Macrocell™

Up to 112 fast I/O ports

51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

Up to 11 timers

Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

2 × 16-bit motor control PWM timers with dead-time generation and emergency stop

2 × watchdog timers (Independent and Window)

SysTick timer: a 24-bit downcounter

2 × 16-bit basic timers to drive the DAC

Up to 13 communication interfaces

Up to 2 × I2C interfaces (SMBus/PMBus)

Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed

CAN interface (2.0B Active)

USB 2.0 full speed interface

SDIO interface

CRC calculation unit, 96-bit unique ID

ECOPACK® packages

STM32F103RC 电路原理图