模块板卡:基于Nordic nRF52832/nRF52810主控芯片的蓝牙模块MS50SFB方案
应用领域:智能家居
方案类型:模块板卡
主控芯片:Nordic nRF52832/nRF52810
方案概述
模块介绍
MS50SFB是采用Nordic nRF52832/nRF52810设计的贴片蓝牙4.0/5.0模块,本模块可采用PCB天线,陶瓷天线,或者带天线IPEX端子三种方式。它有一个ARM内核Cortex-M4F的RF收发器,MCU有更快的运行速度,内核运行速度达到64Mhz,512KB FLASH程序空间、64KB RAM和其它功能强大的配套资源。它适用于低功耗系统、超低的睡眠电流及运行时的低功耗。
产品特点
蓝牙低功耗兼容技术
支持远程的应用
精确的接收信号强度检测(RSSI)
符合CE (欧洲)和FCC(美国)认证标准
内含高性能的ARM Cortex-M4F
带AES安全协议处理器
模块尺寸
引脚定义
引脚符号 | 引脚类型;定义 |
VCC | Power;Power supply |
DCC | Power;DC/DC converter output pin |
GND | Power;Ground |
DEC4 | Power;1V3 regulator supply decoupling. Input from DC/DC converter. Output from 1.3 V LDO |
SWDIO | Digital I/O;System reset (active low). Hardware debug and flash programming I/O programming I/O. |
SWCLK | Digital input;Hardware debug and flash programming I/O |
P0.00 to P0.31 | Digital I/O;General purpose I/O pin |
XL2 | Analog output;Connection for 32.768 kHz crystal |
XL1 | Analog input;Connection for 32.768 kHz crystal or external 32.768 kHz |
RESET | Digital I/O;Configurable as system RESET pin |
电气参数
参数 | 数值 |
工作电压 | 1.8-3.6V |
工作频率 | 2400-2483MHz |
频率误差 | +/- 20KHz |
发射功率 | -40 ~ +4dBm |
接收灵敏度 | -96dBm |
接收电流 | 5.4mA |
发射电流 | 7.5mA |
5.3mA | |
睡眠功耗 | 1uA以下 |
遥控距离 | 10-60米 |
天线 | 50ohm |
模块尺寸 | 20*12*2mm |
传输距离 | 10-60米 |
【 nRF52832 】
Advanced performance Bluetooth5/ANT/2.4GHz proprietary SoC
The nRF52832 SoC is a powerful, highly flexible ultra-low power multiprotocol SoC ideally suited for Bluetooth® low energy (previously called Bluetooth Smart), ANT and 2.4GHz ultra low-power wireless applications. The nRF52832 SoC is built around a 32-bit ARM® Cortex™-M4F CPU with 512kB + 64kB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 Series, nRF24L and nRF24AP Series products from Nordic Semiconductor.
nRF52832
Bluetooth 5
The nRF52832 has hardware support on-chip for Bluetooth 5. This includes high throughput and advertising extension.
Bluetooth 5 high throughput
Bluetooth 5 advertising extension supported
Processing power
The nRF52832 incorporates a powerful Cortex-M4F processor enabling the most demanding applications with complex arithmetic requirements to be realized in a single chip solution. The IC supports DSP instructions, a Floating Point Unit (FPU), single-cycle multiply and accumulate, and hardware divide for energy-efficient process of computationally complex operations.
Multiprotocol radio
The 2.4GHz radio supports multiple protocols including Bluetooth low energy, ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and retrieve. Nordic provides protocol stacks for Bluetooth low energy. ANT protocol stacks are available from ANT here: www.thisisant.com.
Power Efficiency
The nRF52832 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, to automated shut down of all but the absolute essential peripherals required to perform a task.
On-chip NFC tag
NFC™-A tag support is included on chip. Out-of-Band (OOB) pairing using NFC simplifies the process of authenticated pairing between two Bluetooth devices by exchanging authentication information over an NFC link.
Package options
The nRF52832 is available in 6x6mm 48-pin QFN packages and 3.0x3.2mm ultra-compact wafer-level chip-scale packages (WL-CSP).
SoftDevice
The nRF52832 is supported by the S132 SoftDevice, a Bluetooth 5 pre-qualified protocol stack. Click for more information on nRF52 Series in our Infocenter
FEATURES
Single chip, highly flexible, 2.4 GHz multi-protocol SoC
32-bit ARM Cortex-M4F Processor
1.7v to 3.6v operation
512kB flash + 64kB RAM
Supports concurrent Bluetooth low energy/ANT protocol operation
On-chip NFC tag for Out-of-Band (OOB) pairing
Up to +4dBm output power
-96dBm sensitivity, Bluetooth low energy
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L and nRF24AP series
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for power-efficient applications and code simplification
Automated power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
3 x Master/Slave SPI
2 x Two-wire interface (I²C)
UART (RTS/CTS)
3 x PWM
AES HW encryption
12-bit ADC
Real Time Counter (RTC)
Digital microphone interface (PDM)
On-chip balun
APPLICATIONS
Internet of Things (IoT)
Wearables
SmartHome sensors
Connected white goods
Computer peripherals
Voice-command smart remotes
A4WP ‘Rezence’ wireless charging
Beacons
Sports and fitness sensors and hubs
Connected health products
Smart watches
RC Toys
Interactive games
Building automation and sensor networks
【 nRF52810 】
High performance, entry-level Bluetooth 5/ANT/2.4GHz SoC
The nRF52810 is a high performance multiprotocol SoC supporting Bluetooth 5, ANT and 2.4GHz proprietary applications. It has been designed to offer advanced features such as Bluetooth 5 and an ARM Cortex-M4 CPU at a level that makes it compelling for even the lowest cost Bluetooth Low Energy applications. Together with the nRF52840 and nRF52832, the nRF52810 completes the nRF52 Series SoC range, giving developers a broad selection of features, memory variants and small-footprint package options.
nRF52810
The nRF52810 has hardware support on-chip for Bluetooth 5. This includes high throughput (2Mbps) and advertising extensions. Bluetooth 5 improved coexistence features are also supported. Find out more about Bluetooth 5.
Bluetooth 5 high throughput supported
Bluetooth 5 advertising extension supported
Bluetooth5_improved coexistence
Processing power
The nRF52810 incorporates a powerful ARM Cortex®-M4 processor enabling the most demanding applications with complex requirements to be realized in a single chip solution. It also enables all protocol handling to be executed in the shortest timeframe, thus enabling faster return to sleep and current saving ability.
Multiprotocol radio
The 2.4GHz radio supports multiple protocols including Bluetooth Low Energy (Bluetooth 5), ANT and 2.4GHz proprietary. The radio has high definition RSSI and highly automated functionality, including EasyDMA for direct memory access during packet send and receive. Nordic provides protocol stacks for Bluetooth LE. ANT protocol stacks are available from ANT.
Power Efficiency
The nRF52810 SoC is an extremely power efficient device that can run from a supply between 1.7V and 3.6V. All individual peripherals and clocks offer complete flexibility of power down when not required for task operation thus minimizing power consumption to a minimum. The IC has a comprehensive system of automated and adaptive power management features. These features range across the entire IC’s operation from power supply switching to peripheral bus/EasyDMA memory management, and automated shut down of all but the absolute essential peripherals required to perform a task.
Package options
The nRF52810 is available in 6x6mm QFN-48 and 5x5mm QFN-32 packages
SoftDevice
The nRF52810 is supported by the S112 SoftDevice, a Bluetooth 5 pre-qualified Bluetooth LE protocol stack. Click for more information on nRF52 Series in our Infocenter.
FEATURES
Single chip, highly flexible, 2.4 GHz multi-protocol SoC
32-bit ARM Cortex-M4 Processor
1.7v to 3.6v operation
192kB flash + 24kB RAM
Supports concurrent Bluetooth LE/ANT protocol operation
Up to +4dBm output power
-96dBm sensitivity, Bluetooth LE
Thread safe and run-time protected
Event driven API
On air compatible with nRF24L and nRF24AP series
2 data rates (2Mbps/1Mbps)
PPI - maximum flexibility for power-efficient applications and code simplification
Automated power management system with automatic power management of each peripheral
Configurable I/O mapping for analog and digital I/O
1 x Master/Slave SPI
1 x Two-wire interface (I²C)
UART (RTS/CTS)
1 x PWM (4 channels)
AES HW encryption
8-channel 10/12-bit ADC
Quadrature decoder
64-level analog comparator
Real Time Counter (RTC)
Digital microphone interface (PDM)
On-chip balun
APPLICATIONS
Bluetooth 5 connectivity processor
Industrial sensors and actuators
Wearables
SmartHome sensors
computer peripherals
RF smart remotes
Airfuel (A4WP) wireless charging
Beacons
Sports and fitness sensors
Connected health products
Smart watches
RC Toys
Interactive games
Building automation
责任编辑:Davia
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。