IDT ZWIR4532可编低功耗IPv6通信模块IoT解决方案
原标题:IDT ZWIR4532可编低功耗IPv6通信模块IoT解决方案
IDT公司的ZWIR4532是涌进来无线连接IoT设备的可编低功耗IPv6通信模块,集成了超低功耗ARM® Cortex™-M0+ 32位MCU,运行在网络堆栈,是低带宽的通用安全无线电通信模块,采用ZWIR4532传感器和设备能自主工作,或连接到本地或全球的IPv6网络.主要用在无许可证的868/915MHz频段,4路EU频段(865.3–868.3 MHz),10路US频段(906–924 MHz),可选择BPSK或O-QPSK调制,工作电压1.8V-3.3V,工作温度-40℃到+85℃,主要用在工业自动化,家庭和建筑物自动化,健康监视和遥感遥测.本文介绍了ZWIR4532主要特性,框图以及评估板ZWIR4532 EVK主要特性,电路图和PCB元件分布图.
The ZWIR4532 is a programmable low-power secure IPv6 communication module for internet of things (IOT) device networks. Sensors and devices can operate or connect to local or global IPv6 networks using the ZWIR4532. The ZWIR4532 serves as a universal secure radio communication module for applications with low bandwidth requirements.
The module incorporates an ultra-low-power ARM® Cortex™-M0+ 32-bit microcontroller which is running the network stack. In addition, the user application can run on the microcontroller. This helps minimizing the size, complexity and overall BOM. A rich set of digital and analog peripherals is available for interfacing with external application components. Approximately 128kB of flash and 4kB of RAM are available for user applications.
IDT offers the SensorShare user programmable royalty-free 6LoWPAN network stack with mesh routing capability for the ZWIR4532. 6LoWPAN is an Internet Engineering Task Force (IETF) standard for wireless low-power IPv6-based sensor and device networks.
Secure communication is provided by a standard-compliant implementation of the Internet Protocol Security (IPSec) protocol suite.
ZWIR4532主要特性:
• License-free 868/915 MHz frequency bands
• 4 channels in EU frequency band (865.3 – 868.3 MHz)
• 10 channels in US frequency band (906 – 924 MHz)
• BPSK or O-QPSK modulation selectable
BPSK with 20kBps EU and 40kBps U
ARM® Cortex™-M0+ 32-bit ultra-low-power microcontroller
192kB flash and 20kB RAM
6kByte EEPROM
5 UART interfaces
1 SPI interface
3 I²C interfaces
10 PWM outputs
12 bit ADC with 10 input channels
2 analog comparators
31 GPIOs
Network Stack
UDP/IPv6 communication
Mesh networking with hundreds of nodes
Self-healing defective routes
Over-the-Air update capable
Network layer security
Ultra-low power stop mode: < 1μA with full RAM retention
Supply voltage: 1.8V to 3.3V
-40℃ to +85℃ ambient operating temperature
15.6×12 mm 43-LGA Package
ZWIR4532典型应用:
Industrial automation
Home and building automation
Health monitoring
Telemetry
图1.ZWIR4532框图
评估板ZWIR4532 EVK
The ZWIR4532 Development Kit is a set of three circuit boards intended as an evaluation and application development platform for the ZWIR4532 6LoWPAN module. Each Development Board provides an USB interface and an optional single Ethernet interface to connect with the user’s PC. The USB is used as a virtual COM port and provides the power supply for JTAG programming and debugging. The Ethernet interface is provided to easily integrate the 6LoWPAN network into existing network infrastructure. Push buttons and LEDs are available as an on-board user interface. The application circuitry can be easily prototyped.
The Development Kit provides firmware libraries and example programs. Firmware libraries include an operating system, IDT’s mesh-routing-enabled 6LoWPAN stack, IP-Security (IPSec) and Internet Key Exchange version 2 (IKEv2) protocol support, as well as support for over-the-air (OTA) updates and different peripheral libraries. Ethernet gateway firmware is provided with the kit, allowing transparent integration of sensor networks into existing Ethernet networks.
评估板ZWIR4532 EVK主要特性:
IDT SensorShare firmware libraries and example programs
License-free 868/915 MHz frequency bands
IPv6 module addressing
4 channels in EU mode; 10 channels in US mode
Over-the-air update (OTAU) functionality
Mesh connectivity
HS3001 Humidity and Temperature Sensor with I2C interface in the Sensor Cube
• RH accuracy: ±1.5% RH typical (10% to 90% RH,25℃)
• Fast RH response time (typical: 6 seconds)
• Temperature sensor accuracy: ±0.2℃ (typ.) at -10℃ to +80℃
Related datasheets are available online:
• ZWIR4532: www.idt.com/ZWIR4532
• HS3001: www.idt.com/HS3001
• ENC28J60H Ethernet Adapter
https://www.olimex.com/Products/Modules/Ethernet/ENC28J60-H/resources/ENC28J60-H.pdf
• microchip AT86RF212 Transceiver
http://ww1.microchip.com/downloads/en/DeviceDoc/doc8168.pdf
• ST Micro stm32L071 MCU https://www.st.com/resource/en/datasheet/stm32l071v8.pdf
评估板ZWIR4532 EVK包括:
3 ZWIR4532 development boards
3 HS3001 Humidity and Temperature sensors
3 USB to Micro USB cables
3 antennas
1 Ethernet adapter
图2.评估板ZWIR4532 EVK连接图
图3.评估板ZWIR4532 EVK电路图(1)
图4.评估板ZWIR4532 EVK电路图(2)
图5.评估板ZWIR4532 EVK电路图(3)
图6.评估板ZWIR4532 EVK电路图(4)
图7.评估板ZWIR4532 EVK电路图(5)
图8.评估板ZWIR4532 EVK电路图(6)
图9.评估板ZWIR4532 EVK电路图(7)
图10.评估板ZWIR4532 EVK电路图(7)
图11.评估板ZWIR4532 EVK电路图(8)
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。