0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > 基于TI公司的DS125BR800A SAS-3协议中继器解决方案

基于TI公司的DS125BR800A SAS-3协议中继器解决方案

2019-04-16
类别:工业控制
eye 166
文章创建人 拍明芯城

原标题:TI DS125BR800A SAS-3协议中继器解决方案

  TI公司的S125BR800A是能驱动SAS-3协议的8路信号调理器, 支持最新的SCSI标准的最快数据速率,高达12.5Gbps,并和目前的3Gbps和6Gbps SAS链接速率兼容,同时支持PCIe Gen-1, Gen-2, Gen-3和SATA 1.5-Gbps, 3-Gbps与6-Gbps接口标准,具有业界最高的信号调理性能,最低的功耗和系统成本,多种配置选择方便使用,主要用在企业服务器,存储设备和路由系统的中继器.本文介绍了DS125BR800A主要特性,框图和应用框图,以及评估板DS125BR800AEVM 主要特性,电路图,材料清单和PCB元件布局图.

  The DS125BR800A is an extremely low-power high-performance multi-protocol repeater/redriver designed to support eight channels of PCIe, SAS, and other high-speed interface serial protocols up to 12.5 Gbps. The receiver's continuous time linear equalizer (CTLE) provides a boost of up to +30 dB at 6.25 GHz (12.5 Gbps) in each of its eight channels and is capable of opening an input eye that is completely closed due to inter symbol interference (ISI) induced by interconnect medium such as 30in+ backplane traces or 8m+ copper cables, hence enabling host controllers to ensure an error free end-to-end link. The strong linear equalization maximizes interconnect channel extension when the DS125BR800A is placed with the majority of channel loss on the devices input side. Adjustable transmit de-emphasis and output voltage amplitude help to compensate for the remaining channel attenuation on the output side.

  When operating in SAS-3 and PCIe Gen-3 mode, the DS125BR800A transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency. With a low power consumption of 65 mW/channel (typ) and option to turn-off unused channels, the DS125BR800A enables energy efficient system design. A single supply of 3.3 V or 2.5 V is required to power the device.

  The programmable settings can be applied easily via pins, software (SMBus or I2C) or loaded via an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up, which eliminates the need for an external microprocessor or software driver.

  DS125BR800A主要特性:

  Proven System Interoperability

  Comprehensive multi-protocol Repeater Family

  Low 65-mW/Channel (Typ) Power Consumption,

  With Option to Power Down Unused Channels

  Transparent Management of Link Training

  Protocol for PCIe and SAS

  Advanced Signal Conditioning Features

  Rx CTLE up to 30 dB (24 dB for SAS3)

  Tx De-Emphasis up to –12 dB

  Tx Output Voltage Control: 700 – 1300 mV

  Device Configuration Interface:

  Pin Selection, EEPROM, or SMBus Interface

  Single Supply Voltage: 2.5 V or 3.3 V

  −40°C to 85°C Operating Temperature Range

  3-kV HBM ESDRating

  Flow-Thru Pinout: 54-Pin LLP (10 mm × 5.5 mm, 0.5 mm pitch)

  Supported Protocols:

  SAS/SATA

  PCIe

  Other Proprietary Interface up to 12.5 Gbps

  图1. DS125BR800A单路框图(1/8路)

  图2. DS125BR800A典型应用框图

  评估板DS125BR800AEVM

  DS125BR800AEVM: 12.5-Gbps 8-Ch Repeater With Input CTLE and Output De-Emphasis Evaluation Module

  The DS125BR800AEVM SMA evaluation kit provides a complete high band-width platform to evaluate the signal integrity and signal conditioning features of the Texas Instruments signal conditioning products with Equalization and De-emphasis. SMA edge launch connectors are used as the input and the output connections for this evaluation board. Commercially available adaptor boards can be purchased to facilitate connection to cables or backplane interconnects.

  评估板DS125BR800AEVM 主要特性:

  • 8 Channel Repeater up to 12.5 Gbps

  • Low 65 mW/channel power consumption, with option to power down unused channels

  • Transparent management of link training protocol for PCIe, SAS, and 10G-KR

  • Receive Equalization up to 30 dB at 12.5 Gbps

  • Settable transmit de-emphasis driver to -12 dB

  • Transmit output voltage control: 700 – 1300 mV

  • Programmable via pin selection, EEPROM, or SMBus interface

  • Single supply operation: VIN = 3.3V±10% or VDD = 2.5V ±5%

  • -40°C to +85°C Operation

  • 5 kV HBM ESD rating

  • High speed signal flow–thru pin-out package: 54-pin WQFN (10 mm x 5.5 mm, 0.5 mm pitch)

  评估板DS125BR800AEVM应用:

  FR-4 Backplane Traces and High Speed Cable

  图3. 评估板DS125BR800AEVM外形图(正面)

  图4. 评估板DS125BR800AEVM外形图(背面)

  图5. 评估板DS125BR800AEVM电路图

  评估板DS125BR800AEVM材料清单:

  图6. 评估板DS125BR800AEVMPCB元件布局图(顶层)

  图7. 评估板DS125BR800AEVMPCB元件布局图(底层)


责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: TI 中继器

相关资讯